Mercury Smart 1500 Uninterruptible Power Supply UPS is a large capacity UPS providing more backup power and more advanced performance technology. If you're looking for more backup time of possibly up to 40 minutes, this is the Mercury UPS capacity to go for. With the Mercury Smart 1500 Uninterruptible Power Supply (UPS), the following performance features are available to you:
Product specifications
| Input | • Voltage : 140V - 285V • Frequency : 50Hz or 60Hz ±6% |
| Output | • Voltage : 220Vac (±5% Adjustable) • Frequency : 50Hz or 60Hz ±1% • Wave form : Square wave • Voltage Regulation : ±10% • Transfer Time : Typical 3~5msec • Rear socket : 4 x IEC sockets for Battery Backup |
| Battery | • Type : 2 x 12V / 9AH Sealed Lead-Acid, Maintenance free • Back up time : 20 to 40minutes, depending on load condition • Recharge time : 8 hours to 90% capacity |
| Protection | • Over voltage : AC I/P>25% • Under voltage : AC I/P<25% • EMI/RFI : EN 50081-1 and FCC part 15 Class A • Surge : IEEE 587 Category A, varistor clamping 480 joules at 5*10-12sec • Overload : Fuse & current Limited • Short Circuit : Fuse & current Limited &cut off • Low Batt.cut off : Two stages, on battery drain after cut off |
| Audible Alarm | • Battery Discharge : Sounding every 4 seconds after Mains fail • Beep once every second as battery approaches low stage • Overload and short circuit : Continuously |
| Interface | • 9P D-type Connector : AC fault, battery low, shutdown UPS • RUPS software(optional) : Support Netware 3.XX, Window NT, Unix, Sun OS, HP-UX, etc |