Mercury ELITE650 PRO Line Interactive UPS

Input voltage	220VAC
Input frequency	50Hz
Input phase	Single phase
Input socket	With Fuse
Cold Start (0 to 100% load)	Press the ON/OFF switch
Input range (220V)	140V-300V
Rating output (VA).	650VA
Rating output (W).	390W
Rating output (W).	Battery mode(simulated sine wave), AC mode (sine wave)
Power factor	0.6
Rating voltage	220V
Output range	220Vac-7%+15% ( in battary mode )
Rear Output Socket	2xUniversal - Battery backup
Transfer time	TYPICAL 4-8 ms
Communication Interface	NIL
Rating frequency	50Hz
Line-mode	Synchronize with the Utility
Battery mode	50 Hz±1Hz
Line Mode	FUSE & firmware protection
Battery Mode	Software protection controlled by firmware
Line Mode	110%+-5% (Go to fault mode after 5 minutes), 120%+-5% (Go to fault mode immediately)
Battery Mode	110%+-5% (Shutdown after 5 minutes) 120%+-5% (Shut down immediately)
Rating frequency	12V/8.2AH x 1
Backup Tim - Typical	10mins to 18mins (depending on load)
Charge Current	About 1A at normal mode
Over Charge Protection	>14.5V +/- 0.2V stop charging <13.5V +/- 0.5V Recharge

This product hasn't received any reviews yet. Be the first to review this product!

New Products